Overcladding
Wolverhampton.
Robinsons Roofing and Cladding installs over clad roofs and wall over cladding systems on factories, warehouses, workshops and other commercial buildings in Wolverhampton and the surrounding areas.
If your existing roof or cladding is tired but the structure is still sound, over cladding may be a sensible alternative to a full replacement.
Over clad roof and over cladding systems in Wolverhampton.
Overcladding means installing a new roof or wall system over the existing one. It can be a sensible option when the existing covering is tired or no longer performing, but the underlying structure is still sound. We will inspect the building before recommending overcladding, a replacement roof system or an industrial roof replacement.
01Over Clad Roof
A new roof system installed over the existing roof sheets where suitable.
02Overclad Walls
New wall cladding installed over existing panels to refresh and protect the elevation.
03Why Overclad
Reduced downtime, improved thermal performance and lower waste than a full strip-off.
04Insulation Upgrade
Add insulation during overcladding to improve the thermal performance of the building.
05Asbestos Cement Roofs
Overcladding is often an option over sound asbestos cement roofs where safe removal would be disruptive.
06Overcladding vs Replacement
How to decide whether overcladding or a full roof or cladding replacement is right for your building.
07Industrial Roofing
Full industrial roofing services in Wolverhampton including repair, replacement and new build.
08Cladding Contractors
Replacement and new industrial wall and roof cladding across Wolverhampton.
09Rooflight Replacement
Replace tired or damaged rooflights at the same time as the overclad project.
Over clad roof in Wolverhampton.
An over clad roof is a new roof system installed over the existing roof sheets.
It is a common option on industrial and commercial buildings where the existing roof is nearing the end of its useful life, but a complete strip-off and replacement would create more disruption than the building can accept.
A typical over clad roof uses a system of top-hat spacers or rails fitted to the existing purlins, followed by insulation and a new outer sheet.
The result is a new, weather-tight, insulated roof installed on top of the existing covering.
We can inspect your roof to confirm whether overcladding is suitable before recommending any work.
Over clad walls and wall over cladding systems.
Wall overcladding uses the same principle as roof overcladding. A new cladding system is installed over the existing wall panels.
It is often used on factories, warehouses and commercial units where the existing wall cladding is tired, faded or showing cut edge corrosion, but the underlying structure is sound.
Overcladding the walls can also be a chance to refresh the appearance of the building, improve thermal performance and introduce a modern panel finish.
If your building needs both the roof and walls overcladding, we can plan and deliver the whole project together.
Why consider overcladding?
Overcladding is not right for every building, but when it is suitable it can offer real advantages over a full strip-off and replacement:
- Less disruption — the existing roof or wall often stays in place, so the inside of the building is kept weather-tight throughout the work.
- Faster programme — without the strip-off, waste handling and asbestos work, overcladding is often quicker to complete.
- Lower waste — the existing sheets are not sent to landfill.
- Improved insulation — most overclad systems include new insulation, which can significantly improve the thermal performance of the building.
- Better appearance — a fresh modern panel finish instead of a faded, patched existing covering.
- Working around the business — overcladding is often easier to carry out while the business continues to operate.
We will discuss these benefits in the context of your specific building and recommend the right approach.
Improve insulation while overcladding.
Older industrial roofs and walls are often poorly insulated.
Overcladding is a sensible opportunity to upgrade the thermal performance of the building.
Most overclad roof and wall systems include an insulation layer. The thickness and type of insulation can be specified to meet the needs of the building, including Building Regulations requirements for extensions and material change of use.
Improved insulation can reduce heat loss, lower energy bills and make the building more comfortable for the people working inside.
We will explain the insulation options available for your project.
Over cladding and Building Regulations.
Over cladding an industrial roof is usually treated as an improvement to an existing building, but Building Regulations can still apply depending on the scope of the work.
Where more than 25% of a thermal element (such as the roof) is being renewed, Part L of the Building Regulations typically requires the renewed element to meet current U-value targets. A modern over clad roof system is usually specified to meet those targets as part of the design.
Approval can also be relevant where the over cladding supports a material change of use, where significant structural loading is being added, or where the building is listed or in a conservation area.
We will consider Building Regulations requirements as part of the specification and advise if an approval is likely to be required for your over cladding project in Wolverhampton.
Overcladding an asbestos cement roof.
Many older industrial buildings around Wolverhampton still have asbestos cement roof sheets.
Where the existing sheets are in sound condition, overcladding is often a sensible alternative to full removal.
The existing sheets remain in place and a new roof system is installed above them.
This can reduce the disruption, waste handling and specialist removal work that a full strip-off would involve.
Where removal is required, the work can be planned and carried out safely as part of the roof replacement project.
We will inspect the roof and explain the most suitable approach based on the condition of the sheets and the use of the building.
Overcladding or full replacement?
Overcladding and full replacement both result in a new, weather-tight, insulated roof or wall.
The right choice depends on the condition of the existing covering and the structure beneath it.
Overcladding is usually the right choice when:
- The existing roof or cladding is tired but still broadly intact.
- The underlying structure, purlins or rails are sound.
- The business needs to keep operating during the work.
- The existing sheets would be difficult or disruptive to remove.
Full replacement is usually the right choice when:
- The existing covering is badly damaged, perforated or structurally compromised.
- The structure beneath cannot support an additional system.
- The existing material needs to be removed for other reasons.
We will inspect the building and give you a straightforward recommendation.
Which buildings can be overclad?
We overclad roofs and walls on:
- Factories and manufacturing buildings
- Warehouses and distribution centres
- Workshops, garages and trade units
- Light industrial units
- Retail and mixed-use commercial buildings
- Agricultural buildings
If you are not sure whether your building is suitable, contact us and we will inspect the property.
Overcladding for factories, warehouses and industrial units.
01Overcladding factories
Factory roofs are often prime candidates for overcladding because the business can usually continue operating. We understand that stopping production is expensive. Where possible, we plan overclad work so that the existing roof remains in place and the inside of the factory stays dry and operational throughout the project.
02Overcladding warehouses
Warehouse roofs cover large areas and are frequently overclad rather than replaced. Overcladding limits the risk of water ingress affecting stock during the works and offers a chance to improve insulation across the entire roof.
03Workshops and industrial units
Smaller industrial units often benefit from the lower disruption and reduced waste that overcladding offers. We can inspect the building and provide a clear quotation based on what is actually needed.
Can your business stay open during overcladding?
In most cases, yes.
Overcladding is one of the most business-friendly options for upgrading an industrial roof or cladding because the existing covering stays in place during most of the works.
This keeps the building weather-tight and allows the business to continue operating in most cases.
For larger projects, we may complete the overcladding in sections. We can also discuss working hours, access and areas of the building that need to remain available.
Every site is different, so we will discuss this with you before the work starts.
Our aim is to complete the overclad work safely while keeping disruption to your business as low as possible.
Our overcladding process.
We keep the process simple.
- Contact us
Tell us about your building and the condition of the existing roof or cladding.
- Site survey
We visit the property and inspect the existing covering, fixings, rooflights, gutters and the underlying structure.
- Discuss your options
We explain what we have found and whether overcladding is suitable. If a full replacement would make more sense, we will tell you.
- Clear quotation
You will receive a quotation explaining the overclad system we propose, the insulation specification and the finish.
- Plan the work
We agree access, working hours and how the overcladding work will be completed. If your business needs to remain open, this will be considered when the work is planned.
- Install the overclad system
Our team installs the new overclad roof or wall system.
- Final checks
Once the work is complete, we check the finished covering and make sure the agreed work has been completed correctly.
Overcladding near Wolverhampton.
We provide overclad roof and wall systems throughout Wolverhampton and the surrounding areas. This includes:
Looking for over cladding in Halesowen? See our dedicated Halesowen over cladding service.
We also complete larger over cladding projects throughout the Midlands and across the UK.
If you are unsure whether we cover your area, contact us and tell us where your building is located.
Why choose Robinsons for your overclad project?
Choosing an overcladding contractor is not simply about finding the cheapest quotation.
You need to know whether overcladding is actually suitable for your building, what system is being proposed and what you are paying for.
We keep things straightforward.
Our team has experience working on factories, warehouses, workshops, agricultural buildings and other commercial properties.
We can help with repairs, refurbishment, overcladding, replacement, roofing and cladding.
Most importantly, we will inspect the roof or walls before recommending major work.
If overcladding is suitable, we will tell you. If a full replacement would make more sense, we will explain the reasons and the options available.
Recent overcladding projects.
We have completed overcladding, roofing and cladding work on commercial and industrial buildings across Wolverhampton, the Midlands and other parts of the UK.
Our work includes overclad roof systems, wall overcladding, roof replacement and new cladding.
We also have experience completing overclad projects on buildings that need to remain in use while the work is carried out.
What is overcladding?
Overcladding is the installation of a new roof or wall system over the existing one. The existing covering stays in place, and the new system is fixed to the underlying structure above it. It can be a sensible alternative to a full strip-off and replacement when the existing covering is tired but the structure beneath is still sound.
Is overcladding cheaper than a full roof replacement?
It often is, but not always. Overcladding avoids the cost of stripping off and disposing of the existing covering, which can be significant on asbestos cement roofs. On the other hand, overclad systems use additional spacers and fixings that a direct replacement does not need. The best way to compare the two is to arrange a site survey and ask for both options to be quoted.
How long does an overclad roof last?
An overclad roof installed with a modern insulated system is designed to perform in the same way as a new roof. The lifespan depends on the system specified, the quality of the installation and the environment the building is in.
Can you overclad an asbestos cement roof?
In many cases, yes. Where the existing asbestos cement sheets are in sound condition, overcladding is often used as a way to upgrade the roof without the disruption, risk and cost of a full strip-off. We will inspect the roof and advise on the most suitable approach.
Will overcladding improve the insulation of my building?
Yes. Most overclad roof and wall systems include an insulation layer. On older buildings with little or no existing insulation, overcladding can significantly improve thermal performance, reduce heat loss and help lower energy bills.
Does an overclad roof need planning permission?
In most cases, overcladding is treated as a maintenance or improvement to an existing building and does not require planning permission. There can be exceptions, for example on listed buildings or in conservation areas. If you are unsure, we will advise.
Can my business stay open during an overclad project?
Usually, yes. Overcladding is one of the most business-friendly options for upgrading an industrial roof because the existing covering stays in place, keeping the inside of the building weather-tight throughout most of the works.
Can you overclad a wall as well as a roof?
Yes. We overclad wall cladding on factories, warehouses, workshops and other commercial buildings. If both the roof and walls need overcladding, we can plan and deliver the whole project together.
How do I know if overcladding is right for my building?
We will inspect the existing covering and the underlying structure, then give you a straightforward recommendation. If overcladding is suitable, we will explain the system we propose. If a full replacement would make more sense, we will tell you.
What areas do you cover around Wolverhampton?
We cover Wolverhampton and surrounding areas including Bilston, Wednesfield, Willenhall, Walsall, Dudley, Cannock, Telford, West Bromwich, Tipton and Wednesbury. We also complete overcladding projects throughout the Midlands and across the UK.
Thinking about overcladding in Wolverhampton?
If your industrial roof or wall cladding is tired, poorly insulated or showing signs of corrosion, contact Robinsons Roofing and Cladding. We can visit your property, inspect the covering and explain whether overcladding is a suitable option.
You will receive a clear recommendation based on the condition of your building and the work that is actually required.
